The Frontier Sixshooter Community Message Board - Thank You

Thank You (reply)

Dave B — Sun, 25 Sep 2022 14:23:29 +0000

As always sir, appreciated.

Dave

173gr Keith (reply)

Creeker — Fri, 23 Sep 2022 02:19:33 +0000

I use 12.5 of 2400 in the shorter case in the magnum gun.

As Always (reply)

Dave B — Wed, 21 Sep 2022 23:41:31 +0000

Good shooting sir! I wish I still had some 4227!

Dave

Thanks! (reply)

JT — Wed, 21 Sep 2022 15:00:41 +0000

Thanks! (reply)

Dave B — Wed, 21 Sep 2022 00:00:40 +0000

I'll be trying the Unique load as well, I have a bit of 2400 left, and some Unique. Going to try this new fangled Longshot that works so well in my 45 Colt too.

Dave

Yessir it is .. I neglected to say that but Dave understood. (reply)

JimT — Mon, 19 Sep 2022 20:56:14 +0000

Thankfully!

Oops, I just saw "Magnum Brass" in your subject (reply)

Bob Hatfield — Mon, 19 Sep 2022 19:27:04 +0000

Magnum Brass (reply)

Bob Hatfield — Mon, 19 Sep 2022 19:25:21 +0000

I believe Jim's load is in 357 brass and not 38 brass? about 30 years ago I tried 13.5 grains of 2400 and a 158 SWC in 38 cases and had a few case separations in a security six. For a general field load I like 5 grains of Unique with the 173 Keith

Bob

Magnum Brass (reply)

Dave B — Mon, 19 Sep 2022 14:46:15 +0000

I will look and see if I still have some 2400 left. Local shop hasn't had any in 2 years.

173gr Keith (reply)

JimT — Mon, 19 Sep 2022 04:27:25 +0000

In the Ruger Old Model Flat Top .357 and in the Model 92 Rossi I like 14.5 gr. 2400 with a Small Rifle primer.

173gr Keith

Dave B — Mon, 19 Sep 2022 01:50:56 +0000

Wondering what loads everyone uses? I predominantly use 38spl cases due to the OAL in 357 cases and my NM Flattop cylinders seem a scosh shorter than my GP100's. Thanks.

Dave