The Frontier Sixshooter Community Message Board - I really like the Ruger Lightweight Commander in 9mm - NT

I really like the Ruger Lightweight Commander in 9mm - NT (reply)

Bryan — Mon, 12 Dec 2016 22:35:01 +0000

Two -- 1911 9mm and Model 10 snubby (reply)

Scribe — Mon, 12 Dec 2016 16:19:25 +0000

Folks,

Traded some of my cowboy guns for the Colt and am in the process of horse trading for the Model 10, which was rode hard and put away wet. Developed the dreaded orange rash on the outside, but not its innards. A beater that I hope to rehab.

My daughter is visiting us and I hope to get her down to the range and shoot the 9mm and her first gun, a Ruger Single Six .22 (circa 1966).

Scribe

Two .30 cans I have stamps for. NT (reply)

mcassill — Mon, 12 Dec 2016 02:26:55 +0000

Yep. (reply)

Hoot — Sun, 11 Dec 2016 02:25:44 +0000

Need to get loadin' and shootin' I guess.

What's your next purchase...guns, equipment or components? (reply)

Creeker — Sun, 11 Dec 2016 02:10:13 +0000

A mold & sizing die for the 303 British.

No photos yet. (reply)

Creeker — Sun, 11 Dec 2016 01:55:40 +0000

That's a bunch of bullets.

Another can? NT (reply)

Bryan — Sun, 11 Dec 2016 00:47:45 +0000

Probably a bar of titanium. (reply)

mcassill — Sat, 10 Dec 2016 23:59:12 +0000

I have projects to finish, after all.

Never enough N frames. NT (reply)

Bryan — Sat, 10 Dec 2016 22:46:44 +0000

n fame (reply)

Rob Leahy — Sat, 10 Dec 2016 21:56:22 +0000

That's right. I forgot and thought you were in FB. NT (reply)

Bryan — Sat, 10 Dec 2016 20:00:48 +0000

i am in anchorage....been here since 1984 !! (reply)

cable — Sat, 10 Dec 2016 19:52:23 +0000

problem with many of my projects is that they need a gunsmith and i drop stuff off with them and a year or two later its still not done!

Ok that answers my question... (reply)

Bryan — Sat, 10 Dec 2016 14:08:15 +0000

The wire sections were already attached. You didn't add them.

Thanks.

Racks? Confused.... (reply)

Hoot — Sat, 10 Dec 2016 12:04:35 +0000

The U of M was scrapping out a bunch of lockers from some dorm or another. Inside each of the lockers were two vinyl coated, welded wire shelves; wide on the bottom and narrow up top. I grabbed a dozen or so of each of the shelves and bolted them to the 2x6 uprights. The white is an industrial grade cardboard set on the wire face of the shelves to give a smooth surface to the shelves.

Or did I miss the point entirely?

now at age 69, i am realizing that ........... (reply)

Brian A — Sat, 10 Dec 2016 05:55:33 +0000

Only a 30 to 40 year backlog? I figured mine is at least a 150 year backlog. Of course, you may work faster than I do and am only 55 years old.

I hear you. Still in Fairbanks? NT (reply)

Bryan — Sat, 10 Dec 2016 04:05:47 +0000

No doubt John. Would like to talk when you get time. NT (reply)

Bryan — Sat, 10 Dec 2016 04:05:21 +0000

Excellent. Thanks again. NT (reply)

Bryan — Sat, 10 Dec 2016 04:04:30 +0000

Already have more than I can shake a stick at; trying to (reply)

John K. — Sat, 10 Dec 2016 03:21:45 +0000

finish projects I have stacked up over the last 40yrs.

I hear you. Brass arrived today. Thanks! NT (reply)

Brian A — Sat, 10 Dec 2016 01:55:46 +0000

Hope it is everything you were hoping for.