The Frontier Sixshooter Community Message Board - Do you suppose it would be the trigger for the 85 Combat?

Do you suppose it would be the trigger for the 85 Combat? (reply)

rob — Sat, 09 Jul 2016 03:43:12 +0000

On the CGW sight, their straighter trigger is called the "old style" 85C. The CZ sight doesn't give a lot of description. The one I want at CGW is out of stock but if I buy the reach reduction kit it looks like it's included. Looks like it has a set screw at the top that limits trigger return travel and it's coupled with a new disconnecter to offset the difference of the trigger being back a bit...so the hammer is at rest. Looks like a neat kit but I am waiting on an email response from them to be sure the trigger is the straight version. If the 85 Combat trigger is correct for what I want on the CZ page I'd just buy that but I'm not sure how to know for sure. Doing some CZ forum surfing.

So you retired from the law enforcement gig? (reply)

rob — Sat, 09 Jul 2016 03:26:40 +0000

I bet that feels good! After what happened in Dallas last night I've been pretty disheartened all day.

i saw that yesterday... (reply)

rob — Sat, 09 Jul 2016 03:24:23 +0000

That's a steal if they are decent.

Cajun Gun Works has a modified 85C trigger (reply)

rob — Sat, 09 Jul 2016 03:23:12 +0000

That can also be used with their reach reduction kit. I "think" the kit is $88 and includes the straighter trigger. The trigger itself is $44 and I think it's drop-in. I'll check the CZ store and see what they have. One way or another, this guns gonna get a straight'ish' trigger:)

The problem with my Glock... (reply)

Sarge — Sat, 09 Jul 2016 03:08:13 +0000

They never did feel right to me and I spent 8 years doing my damnedest to get used to them. I retired from that dog & pony show in May and my last Glock went away the next day. Sig's 22X pistols have always suited me and I shot them better than anything this side of a tuned 1911. I carry a 229 in .40 these days and expect it'll do as long as I need one.

Bud's has some used in "Fair" condition for $279... (nt) (reply)

Paul — Sat, 09 Jul 2016 02:11:10 +0000

Go to the CZ store and buy a straight trigger! (reply)

Otony — Sat, 09 Jul 2016 01:56:01 +0000

If the Omega trigger isn't correct, there IS a straight trigger available that will work.

Otony

i think I'll keep this one:) Now I need a Shield or... (reply)

rob — Fri, 08 Jul 2016 23:51:14 +0000

Ruger LC9s. Handled both today and they are slick! The last Shield I handled had a terrible trigger. This one was incredible and the Ruger was too. I'm just gonna save the money and buy one...probably the Shield but it will be a tough decision!

It sorta bothers my finger in DA mode too with the curved... (reply)

rob — Fri, 08 Jul 2016 23:47:31 +0000

trigger but I like it enough to overlook it:) Hopefully the DA will slick up a bit. I put about 50 rounds through it today including some carry ammo and it was reliable, pleasant to shoot and a one ragged hole gun but that was 21 feet and I didn't have time to move out to a farther range.

Let's talk CZ pistols... (reply)

Harry O-1 — Fri, 08 Jul 2016 23:33:49 +0000

I have a CZ-75 Compact. Fits my hand very well. It is also the most accurate "high-capacity" 9mm that I own. It is totally reliable. I like it a lot. Go with a CZ instead of a clone even though you may have to pay a little bit more. CZ-s are not that expensive. I think they are worth the few dollars extra.

I later bought a clone called the Canik 55 Compact from one of my co-workers fairly cheap. It uses the same magazines as my CZ-75. I don't know how many other parts will interchange, but the internal parts look the same. The Canik is heavier because it uses a steel frame instead of the aluminum of the CZ. The accuracy is not quite as good as the CZ-75, but it is better than most of my other hi-cap 9mm's, about the same as my Browning P-35.

Sell it to me while in search of your next perfect packin (reply)

Rob Leahy — Fri, 08 Jul 2016 22:01:59 +0000

pistol!

just bought a stainless 75B (reply)

Otony — Fri, 08 Jul 2016 20:19:17 +0000

Otony

just bought a stainless 75B (reply)

rob — Fri, 08 Jul 2016 18:59:10 +0000

That won't bite the hand:) (reply)

rob — Fri, 08 Jul 2016 18:57:23 +0000

And they mangaed to ruin it by mimicing the too heavy slide (reply)

Rob Leahy — Fri, 08 Jul 2016 17:36:11 +0000

on the Auto Mag...Just my opinion, based on experience...

I am carrying a Hi-Power..... (reply)

Otony — Fri, 08 Jul 2016 17:15:47 +0000

....as I type this.

Proper holster and belt makes all the difference.

Otony

I love the feel of the CZ or clone - to me it is like a (reply)

stonewalrus — Fri, 08 Jul 2016 16:53:08 +0000

DA Hi Power.

Good looking pistols!. (reply)

rob — Fri, 08 Jul 2016 16:01:24 +0000

Very good info... (reply)

rob — Fri, 08 Jul 2016 15:56:07 +0000

I would really prefer the standard CZ 9mm but I wonder how easy it would be to carry..I know that's a subjective thing though.

The compacts are just spiffy. (reply)

cas — Fri, 08 Jul 2016 15:38:59 +0000

I sure dont need one, but if one ever crossed my path at a decent price I would probably grab it.

I was tempted by a 97 but I was afraid of the magazine supply so I let the urge pass. (I don't think there is a magazine supply problem but that was the excuse I used to talk myself out of it )

I had a CZ75SA go through my hands. I fought long and hard about keeping it, I just couldn't think of what I'd do with it. Maybe a Steel gun, but I still don't shoot steel. lol. I was selling it for a friend's widow , so I selling it for the highest price I could get was the best option at the time, I was too broke to pay much at the time. I still regret not keeping it though.

I still have my USPSA / 3-Gun guns.... Even though I'm not active currently due to injury.