The Frontier Sixshooter Community Message Board - Will is do anything BETTER than a 4" gun? No, not a thing &

Will is do anything BETTER than a 4" gun? No, not a thing & (reply)

SKgrips — Fri, 05 Dec 2014 03:26:02 +0000

I have the Match Champion, its fantastic!

First trip out (reply)

Jared — Mon, 01 Dec 2014 04:40:43 +0000

Glad it shoots for you. I like the original GP100 grips or the GP100 compact grips. They fit my hands well and handle recoil for me much better than the hogues. That is a really nice package.

I've been known to take a file to the... (reply)

rob — Mon, 01 Dec 2014 02:53:49 +0000

rear sight notch one way or the other, turned barrels and or bend the sights. I don't mind them too much depending on the gun. I can't stand them on those bright polished Vaqueros though. And I'm not a fan of the way the sights mount on Vaqueros...I needed to tweek one ever so slightly on a Montado and it popped right of in the vice...not even close to rugged! At least the pinned sight on a 3" GP100 isn't gonna pop off:)

I bend them to my will ;) (reply)

Sarge — Sun, 30 Nov 2014 23:35:18 +0000

Manner & file on them too, if necessary

First trip out (reply)

Dave B — Sun, 30 Nov 2014 23:25:04 +0000

Shot it at 25, at 15, and at 60 yards, three different bullets, 6 different loads (didn't realize I had so much 357 Mag ammo stashed away). Shot from a Bog Pod, at 25 yards it was impacting 2 1/2" to the right, shot it offhand, shot in the black except for one shot that I pulled (trigger has a little creep). Shot 5 for 5 in an 8" square at 60 yards shooting offhand. For the record, I never shoot this good with my larger caliber guns offhand, I don't think I practice enough. It seems to like the 358 156 just a little better than the Miha 359 640 bullet, but either one will be dandy for dispatching jackrabbits. At 25 yards, between all of the different bullet/powder/primer differences, the point of impact shifted about 6-7", this is one gun I am hoping to find just a couple of loads it really likes and stick with them, I will say it seems to like the heat, did much better with the true Magnum loads. New grips will be a necessity.

Dave

You'll just have to make do... (reply)

Rob Leahy — Sun, 30 Nov 2014 22:55:25 +0000

I bet you can't wear it out:) (reply)

rob — Sun, 30 Nov 2014 21:15:31 +0000

I have a 4" but I put a set of the compact wood insert style grips (the ones that used to come standard on those 3" guns) on mine. It's easy to fully conceal and carry comfortably inside the waistband. They fit my hand just fine and I have big hands. I think they would look more balanced on the short barrel gun if the short barrel/long grips thing bothers you like it does me.

I'm with you...almost... (reply)

rob — Sun, 30 Nov 2014 21:05:20 +0000

I like the blue guns as well and a blue, traditional style short shroud would be really nice, but I much prefer click adjustable sights on a gun like that.

I'd look at a 4" K in 357 form a trail gun (reply)

Rob Leahy — Sun, 30 Nov 2014 20:53:48 +0000

I like the short lug GPs as well..

I'd rather have a 4" blue, short shroud GP100... (reply)

Sarge — Sun, 30 Nov 2014 20:14:11 +0000

with fixed sights than either of them; but I am sorta twisted like that.

Down the road (reply)

Dave B — Sun, 30 Nov 2014 19:22:49 +0000

I would like to add another, either a 4" or a 6", could not find a National Match, and the one's I looked at online, were well out of my price range. This one will likely ride in a backpack pocket or a simple belt holster.

Dave

Opinions on a 3" GP100 (reply)

Dave B — Sun, 30 Nov 2014 19:19:54 +0000

15% off, I couldn't walk away.

Will is do anything BETTER than a 4" gun? No, not a thing & (reply)

Rob Leahy — Sun, 30 Nov 2014 19:09:53 +0000

the one thing it is touted for ; concealment, it is actually worse at. Get the Match Champion: it is smooth, easy to tote and really hides well. I prefer the balance and handling of the MC: it is more akin to a Security Six or my L frame Mountain Gun than a factory GP100. The 4" barrel, as I have stated many times, helps press the gun into your side and carry more comfortably.
The only thing about those short barrels guns is the look sorta neat.

Thank You Gentleman (reply)

Dave B — Sun, 30 Nov 2014 06:07:57 +0000

I appreciate the input!

I am very fond of 3" revolvers..... (reply)

Glen — Sun, 30 Nov 2014 05:45:32 +0000

....and have chronographed most of them. Bottom-line -- they are generally a little bit slower than the 4" guns, but the cylinder gap is generally more important than the 1" in barrel length (i.e. I have several 3" sixguns that are faster than their 4" brethren).

I have had (reply)

MR — Sun, 30 Nov 2014 03:30:56 +0000

a 3 inch M-66 ("Treasury Gun")
a 3 inch Python. Not a 2.5 inch.
and currently have a 3 and a smiggen inch SP-101.

Never chrono'ed 'em but the do hit hard and are LOUD.

Although my ears still say a 4 inch Python is the loudest of the loud.

What strikes me is that the M-66 and Python were overly bulky for normal uses where a 3 inch might be chosen over a 4 inch.

Opinions on a 3" GP100 (reply)

Warhawk — Sun, 30 Nov 2014 03:29:47 +0000

I don't have a GP100, but I do have a stainless Speed Six with a 2 3/4 barrel. It's a dandy sixgun, and one of the last guns I'd ever part with. I typically load it with the Speer short barrel 38 spl load.

Opinions on a 3" GP100 (reply)

Sarge — Sun, 30 Nov 2014 01:49:30 +0000

I had a well-used 3" short shroud Century re-import for awhile and a few problems aside, i was a real decent sixgun. I did not own a chronograph at the time so I can't help you with actual velocities.

http://www.thesixgunjournal.net/dialing-in-a-fixed-sight-ruger-da-the-repatriated-ruger...

Opinions on a 3" GP100

Dave B — Sun, 30 Nov 2014 01:11:12 +0000

Not sure how much velocity loss from such a short tube, but sure looks like a handy sixgun package.

Dave