The Frontier Sixshooter Community Message Board

Stephen Hunter-TheThird Bullet - Art, 2014-01-20, 19:19
- Stephen Hunter-TheThird Bullet - Remington40x, 2014-01-22, 12:27
- One of my favorite authors - Jhenry, 2014-01-26, 11:46

Mark Stevenson, could you drop me an email please? - webservant, 2014-01-20, 10:15
- E-mail sent - Mark Stevenson, 2014-01-21, 05:38
  - reply heading north - webservant, 2014-01-21, 05:47

Recovered bullet pics - John K., 2014-01-19, 19:10
- Forgot to include recovered weight - 155gr. nm - John K., 2014-01-19, 19:14
  - Forgot to include recovered weight - 155gr. nm - Jared, 2014-01-20, 09:00
    - Agreed, back in the old days it was hard to get repeatable - John K., 2014-01-20, 09:53
      - I had some of the old Remington 185gr +P - Jared, 2014-01-20, 18:53
        
        Ice storm - Catoosa, 2014-01-21, 11:27
        
        useless flying ashtray trivia - MR, 2014-01-21, 16:17
        
        I used to go to a shop in Lewiston, Idaho...bought blems by - Rob Leahy, 2014-01-21, 17:14

Remington 788 6mm Left Hand - SKgrips, 2014-01-19, 18:55

Oof! - JohnB, 2014-01-19, 17:32
- Oof! For sure !! All that is missing is the shipper. - Cherokee, 2014-01-19, 18:56
- Pie in the sky. - Andrew, 2014-01-19, 19:05
  - There is a reason for that Python barrel price - cubrock, 2014-01-19, 21:29
- All that's going to do is drive up the prices on Goober's... - Hoot, 2014-01-21, 07:32

FS:Ruger Old Army - SKgrips, 2014-01-19, 17:20
- Sure would like to see the box label. - Kentucky, 2014-01-19, 20:23
  - Send me your email and Ill sedn you a pic of it - SKgrips, 2014-01-20, 19:31

FS: Auto Ordnance stainless 1911, 45 ACP - matt/pa, 2014-01-18, 21:52
- I have never seen one of those. Pre-Kahr, by the markings. - Andrew, 2014-01-18, 22:28

Is Elmer McEvoy still in business? - Catoosa, 2014-01-18, 21:17
- Is Elmer McEvoy still in business? - SIXGUNNER, 2014-01-18, 23:01
  - Is Elmer McEvoy still in business? - SIXGUNNER, 2014-01-19, 09:45
- IWB revolver holsters - Slow Hand, 2014-01-19, 07:08
- He makes great gunleather. - Rob Leahy, 2014-01-19, 11:55
- Thanks, folks - Catoosa, 2014-01-19, 21:35
- Is Elmer McEvoy still in business? - Aaron, 2016-10-17, 13:15

I got the Clapp today. - Andrew, 2014-01-18, 17:56
- I got the Clapp today. - anachronism, 2014-01-18, 19:37
  - A thorough investigation of the gun and papers shows - Andrew, 2014-01-18, 20:43
  - The .44 specail is dead article REALLY PO'd a lot of folks - Rob Leahy, 2014-01-19, 14:12
  - Ken S Latrans (canis latrans=coyote) wrote into an - anachronism, 2014-01-20, 17:39

Trip to see Swans - Tom Richardson, 2014-01-18, 14:27
- Trip to see Swans - Cherokee, 2014-01-18, 17:50
  - But how much creek rock can it haul? - Jhenry, 2014-01-18, 20:42
- Rancherstang? Mustero? - Andrew, 2014-01-18, 17:59
- I always did like John Deere Green. - MR, 2014-01-18, 20:43
  - ruined a fastback no less... - Rob Leahy, 2014-01-18, 22:32
    - ruined a fastback no less... - Slow Hand, 2014-01-19, 07:42
      - ruined a fastback no less... - Tom Richardson, 2014-01-19, 07:53
        
        i wonder if this was a salvage op from a rear end wreck? - Rob Leahy, 2014-01-19, 13:23
        
        There is a kid in the neighborhood with a Chevy Metro - Andrew, 2014-01-19, 16:40
        
        Rose Bud? - D Sikes, 2014-01-19, 15:06
        
        Rose Bud? - Tom Richardson, 2014-01-19, 17:10
- El Camustang??? nm - matt/pa, 2014-01-18, 21:53
- Looks like... - Brian A, 2014-01-19, 08:15
- Perfect Arkansas sex stone hauler(nm) - JohnB, 2014-01-19, 12:04

Cast Minie Ball In A Cartridge Question - Hoot, 2014-01-18, 10:48
- Cast Minie Ball In A Cartridge Question - uncowboy, 2014-01-18, 11:17
  - Yep. That's the mold I was thinking of... - Hoot, 2014-01-20, 07:55
- Cast Minie Ball In A Cartridge Question - D Sikes, 2014-01-18, 13:43
  - Hey Don! BP sure would be fun. - Hoot, 2014-01-20, 07:59
- Cast Minie Ball In A Cartridge Question - Jared, 2014-01-18, 13:58
  - Thanks Jared! - Hoot, 2014-01-20, 08:06
- Cast Minie Ball In A Cartridge Question - Slow Hand, 2014-01-18, 19:40
  - Thanks Doug! - Hoot, 2014-01-20, 08:12
- Cast Minie Ball In A Cartridge Question - Paul, 2014-01-20, 10:41
  - Yep, I recall your 'inappropriate powder' tale. - Hoot, 2014-01-21, 07:37
    - Yep, I recall your 'inappropriate powder' tale. - Slow Hand, 2014-01-21, 08:16
      - Thanks Doug! - Hoot, 2014-01-23, 11:39
- A quick look at Lee's site... - Paul, 2014-01-20, 10:47

38/44 Outdoorsman on GB - Andrew, 2014-01-17, 19:42
- 38/44 Outdoorsman on GB - cubrock, 2014-01-17, 21:53
  - 38/44 Outdoorsman on GB - Catoosa, 2014-01-18, 21:30
    - Agreed, but - cubrock, 2014-01-18, 22:10
      - Agreed, but - Catoosa, 2014-01-19, 21:50

I wonder when the S&W M69 will be available (nm) - bj2, 2014-01-16, 23:31
- Two weeks. - Drago, 2014-01-17, 09:34
- I kinda remember the S&W guy telling Jeff that - Hobie, 2014-01-19, 15:55
- That was my favorite thing at SHOT. Really... - Boge Quinn, 2014-01-20, 15:08

5MM Remington Ammo FYI - Art, 2014-01-16, 17:57
- Sportsmans Guide - Catoosa, 2014-01-16, 18:08

The famous Rob Leahy - movie (youtube) star - stonewalrus, 2014-01-16, 17:47
- Be sure to watch the very end of the video!... - Boge Quinn, 2014-01-16, 19:39
  - Yes, be sure to watch the very end of the video! - Drago, 2014-01-16, 19:44
    - Good people, good times - John Meeker, 2014-01-17, 21:52
  - Saw it - stonewalrus, 2014-01-16, 20:32
  - Was NOT impressed with the EAA blonde - stonewalrus, 2014-01-16, 20:34
    - Now the Sandra Bullock lookalike...... - Otony, 2014-01-16, 21:29
      - Huge no-no........... - Byron, 2014-01-17, 07:50
        
        Wrong girl, Byron..... - Otony, 2014-01-17, 09:17
        
        And she knew what she was doing, too! Sexiness factor... - Boge Quinn, 2014-01-20, 15:09
        
        And she knew what she was doing, too! Sexiness factor... - Slow Hand, 2014-01-21, 21:28
  - My Good Friends... - Rob Leahy, 2014-01-19, 13:25
    - My Good Friends... - Catoosa, 2014-01-19, 22:11

It's that time of year again - forum and website hosting - webservant, 2014-01-16, 15:55
- Done. (nm) - cubrock, 2014-01-16, 16:06
- I'm in. - brionic, 2014-01-16, 17:31
- Done. - Wildcat, 2014-01-16, 17:38
- Done. NM - Andrew, 2014-01-16, 18:14
- Done - stonewalrus, 2014-01-16, 18:23
- Done..... - JD, 2014-01-16, 18:26
- TELL 'EM TO SEND MY $287.40 TO MY POB OR ELSE - Who....me...??, 2014-01-16, 19:13
- Will do.. - Cherokee, 2014-01-16, 19:24
- Done and..... - Otony, 2014-01-16, 20:49
- Paul - email sent....nm - matt/pa, 2014-01-16, 20:57
- Done. - Fivegunner, 2014-01-17, 03:48
- Done. Thanks again! - Mike P, 2014-01-17, 08:00
- Done - John Meeker, 2014-01-17, 09:42
- Done. - Hoot, 2014-01-17, 11:23
- Done - Harry O-1, 2014-01-17, 21:09
- Sheesh! Put up a note and don't check in for a while and - webservant, 2014-01-17, 23:19

Sent the rolling block off to John Taylor....... - Otony, 2014-01-15, 17:29
- Sent the rolling block off to John Taylor....... - RidinLou, 2014-01-15, 18:37
  - Sent the rolling block off to John Taylor....... - Otony, 2014-01-15, 18:45
    - Sent the rolling block off to John Taylor....... - Lee J., 2014-01-15, 19:16
      - Sent the rolling block off to John Taylor....... - Otony, 2014-01-15, 19:44
        
        Sent the rolling block off to John Taylor....... - Lee J., 2014-01-15, 21:00
- That sounds lovely. - Hoot, 2014-01-16, 08:45
- Sent the rolling block off to John Taylor....... - DMann, 2014-01-16, 08:51
  - Sent the rolling block off to John Taylor....... - Otony, 2014-01-16, 09:50
    - Sent the rolling block off to John Taylor....... - DMann, 2014-01-17, 10:37

Hi folks. - Nath, 2014-01-15, 15:32
- Welcome to the fire - Jhenry, 2014-01-15, 16:41
- Hi folks. - Cherokee, 2014-01-15, 16:51
- Welcome aboard Nath. - Murphy, 2014-01-15, 17:36
- Welcome Nate - Fivegunner, 2014-01-15, 18:57
- It will be nice to have a mate from Old Blighty around! - Andrew, 2014-01-15, 19:08
  - It will be nice to have a mate from Old Blighty around! - Gary G, 2014-01-15, 19:22
- Welcome aboard! (nt) - Paul, 2014-01-15, 21:06
- Hullo Nath and welcome! - Hoot, 2014-01-16, 08:57
  - Hullo Nath and welcome! - Nath, 2014-01-16, 12:20
    - Ah! Found it! - Hoot, 2014-01-16, 13:35
- Hiya Nath. - MR, 2014-01-16, 10:26
- Welcome aboard, Nath! - Paul, 2014-01-16, 15:58
  - Welcome aboard, Nath! - Nath, 2014-01-17, 11:21
- Hi folks. - Tom Richardson, 2014-01-17, 10:10

Lyman 162 gr 357446 swc bullets in the .357 Magnum - robbt, 2014-01-15, 12:45
- Lyman 162 gr 357446 swc bullets in the .357 Magnum - John D, 2014-01-15, 13:41
- Lyman 162 gr 357446 swc bullets in the .357 Magnum - Charles, 2014-01-15, 13:48
  - Lyman 162 gr 357446 swc bullets in the .357 Magnum - Cherokee, 2014-01-15, 16:56
- Lyman 162 gr 357446 swc bullets in the .357 Magnum - anachronism, 2014-01-15, 18:28

Got my XDs back from Springfield yesterday. Shot it today. - cubrock, 2014-01-14, 21:23
- Got my XDs back from Springfield yesterday. Shot it today. - Cherokee, 2014-01-15, 12:41
  - Got my XDs back from Springfield yesterday. Shot it today. - cubrock, 2014-01-15, 12:49
- Got mine back before Thanksgiving... - matt/pa, 2014-01-15, 14:33
  - I shoot mine as well and as comfortably as I do a full sized - cas, 2014-01-15, 15:28

new stocks for the 28-2 - Scott Williams, 2014-01-14, 17:24
- new stocks for the 28-2 - uncowboy, 2014-01-14, 18:20
- new stocks for the 28-2 - Cherokee, 2014-01-14, 18:29
- new stocks for the 28-2 - Charles, 2014-01-14, 20:40
- Beautiful! His prices are very reasonable, too - cubrock, 2014-01-14, 21:17
- CULINA GRIPS - SIXGUNNER, 2014-01-15, 12:20
  - In other words... - Paul, 2014-01-15, 13:05
    - EXACTLY WHAT I SAID IN THE ARTICLE - SIXGUNNER, 2014-01-15, 13:59
- Good looking set! - brionic, 2014-01-15, 13:43
- VERY nice! - Hoot, 2014-01-16, 08:59

Laser Rangfinder Damage and Repair - Gary G, 2014-01-13, 20:01
- Laser Rangfinder Damage and Repair - Lee J., 2014-01-14, 15:33
  - Laser Rangfinder Damage and Repair - Gary G, 2014-01-15, 19:20

Some prayers needed folks - Jhenry, 2014-01-12, 19:25
- Done my friend - Sarge, 2014-01-12, 19:27
- Some prayers needed folks - Lee J., 2014-01-12, 20:42
- Done. - Slow Hand, 2014-01-12, 20:57
- Some prayers needed folks - Cherokee, 2014-01-12, 22:03
- You got it. - brionic, 2014-01-12, 22:24
- Some prayers needed folks - Gary G, 2014-01-12, 23:10
- Prayers sent - Fivegunner, 2014-01-13, 03:52
- Some prayers needed folks - jgt, 2014-01-13, 06:07
- Prayers sent - Tom Richardson, 2014-01-13, 06:09
- Done.... nm - Brian A, 2014-01-13, 07:40
- You've got it Sir. - Hoot, 2014-01-13, 08:53
- Prayers for you both - Charles, 2014-01-13, 14:04
- Prayers sent. - Murphy, 2014-01-13, 19:07
- Prayers said for all concerned. - Hobie, 2014-01-13, 21:23
- Some prayers needed folks - Mark Stevenson, 2014-01-15, 05:47
- Some prayers needed folks - john purcell, 2014-01-15, 20:15
  - Thanks John - Jhenry, 2014-01-16, 11:48

I decided to collect some Rugers from my birth year, 1969. - Andrew, 2014-01-12, 16:58
- I decided to collect some Rugers from my birth year, 1969. - Cherokee, 2014-01-12, 17:22
- That's a nice one to start off with, Andrew. - AkRay, 2014-01-12, 17:24
- Nice one! - Hoot, 2014-01-13, 08:56
  - All my other Rugers are older. - Andrew, 2014-01-13, 09:40
    - My Rugers span 1956 to 2013. - Hoot, 2014-01-13, 10:30

FS: Ruger M77 International (RSI) in 308, tang safety - matt/pa, 2014-01-12, 16:31
- Matt... - Drago, 2014-01-12, 17:05
  - It always works that way, don't it? Feast or famine... - matt/pa, 2014-01-12, 19:27
    - OOF!... - Catoosa, 2014-01-12, 21:50
    - E-mail sent. - Drago, 2014-01-13, 09:15
- Purty! - Hoot, 2014-01-13, 08:59

My son is a Captain America fan...... - Otony, 2014-01-11, 22:10
- My son is a Captain America fan...... - Slow Hand, 2014-01-12, 05:16

my brother stumbled across an Iver Johnson break top - stonewalrus, 2014-01-11, 21:53
- my brother stumbled across an Iver Johnson break top - Cherokee, 2014-01-12, 11:54
  - Too bad it wasn't a Colt Single Action - stonewalrus, 2014-01-12, 16:17
    - Too bad it wasn't a Colt Single Action - Catoosa, 2014-01-12, 21:29
- I ended up with a couple. - Hoot, 2014-01-13, 09:01

Going price on a 6 1/2" three screw .357 Blackhawk? - Slow Hand, 2014-01-11, 19:34
- If unconverted and with original grips, that's about right.. - matt/pa, 2014-01-11, 20:35
- I passed on a 4 5/8", 1970 era for $350 cash total - Andrew, 2014-01-12, 17:10

WTB - Rear Sight assembly for blued N-frame, 5906 grips - matt/pa, 2014-01-11, 19:15

Two knife builds for sale..... - Gunner, 2014-01-11, 16:02
- Sweet! Nice, handy looking blades... - Paul, 2014-01-11, 18:52