The Frontier Sixshooter Community Message Board

What's the word on Dan Wesson revolvers... - rob, 2014-04-27, 22:36
- Phenomenal guns - cubrock, 2014-04-27, 23:06
- my son and i both have them; i have the stainless vent heavy - cable, 2014-04-28, 00:16
  - It would be nice if they start... - rob, 2014-04-28, 07:26
    - i will keep an eye out for you. i like the four inch - cable, 2014-04-28, 09:22
- High Standard sold a version of a DW too. - Andrew, 2014-04-28, 06:47
- Article on DW's in the current Handloader, coincidently. - Hoot, 2014-04-28, 13:20
  - Cool, I'll have to search one out... - rob, 2014-04-28, 19:37
- I appreciate all the info guys... - rob, 2014-04-28, 19:40

FS: Colt New Frontier Single Action, 44-40, 4 3/4" bbl - matt/pa, 2014-04-27, 19:12
- Nice, Matt! (nm) - cubrock, 2014-04-27, 21:13
- Sold Pending Funds. Tx. (NM) - matt/pa, 2014-04-30, 07:09

Last word on the Rossi 92... - Sarge, 2014-04-27, 18:46
- Looks like you have it sorted out - Jared, 2014-04-27, 22:38
  - Think I'm going to find some 180/200 grain LFN's... - Sarge, 2014-04-27, 23:29
    - Think I'm going to find some 180/200 grain LFN's... - Slow Hand, 2014-04-28, 04:47
      - my 'go to' load is - bob, 2014-04-28, 10:50
- Good stuff Sarge. - Hoot, 2014-04-28, 09:43

Looking for a used Commander length 1911 45 barrel. - Andrew, 2014-04-27, 17:12
- That looks dangerous. I like it. - Sarge, 2014-04-27, 18:52
  - Poo. Website says out of stock. - Andrew, 2014-04-27, 19:48
- Looking for a used Commander length 1911 45 barrel. - Slow Hand, 2014-04-28, 04:52
  - I suppose it probably could. - Andrew, 2014-04-28, 06:21
- That is just wild. - Hoot, 2014-04-28, 09:45
- Looking for a used Commander length 1911 45 barrel. - Gary G, 2014-04-28, 19:38
  - Thanks! - Andrew, 2014-04-28, 19:52
    - Thanks! - Gary G, 2014-04-28, 21:29

FS: Winchester 94, 30-30, pre-safety.. - matt/pa, 2014-04-27, 16:38

Guns for sale: Includes shipping holster and ammo UPDATED - Rob Leahy, 2014-04-27, 15:17
- I'll go $550 for a pre lock 686 6" and... - rob, 2014-04-27, 15:24
- Rob - is the GP100 full lug or 1/2 lug? - matt/pa, 2014-04-27, 15:34
  - the is GP100 full lug - Rob Leahy, 2014-04-28, 09:04
- Dang, I'd almost buy a PD just to get the holster. - Andrew, 2014-04-27, 15:39
- I need the PD mags!... - Boge Quinn, 2014-04-27, 21:34
  - Sorry! - Rob Leahy, 2014-04-28, 09:05
- Bad timing Rob. - Hoot, 2014-04-28, 09:44
- I've talked myself into and out of this SP101 four times - cas, 2014-04-29, 16:34

NRA Show - Slow Hand, 2014-04-27, 08:52
- It was good to meet you... - Boge Quinn, 2014-04-27, 14:02
  - It was good to meet you... - Slow Hand, 2014-04-27, 16:54
- NRA Annual Meeting Show - RidinLou, 2014-04-27, 15:40
- Glad you had a good time, sorry not to have met you. - Hobie, 2014-04-27, 21:55

Speaking of small guns. - Flatlander, 2014-04-26, 21:12
- Speaking of small guns. - Paul, 2014-04-26, 21:50
- I like those much better... - Sarge, 2014-04-27, 07:00
  - I like those much better... - RidinLou, 2014-04-27, 15:43
- Speaking of small guns. - Art, 2014-04-27, 18:44
  - Totally different critter than the M&P - stonewalrus, 2014-04-27, 19:50
  - there is the standard bodyguard and the M&P bodyguard - - Flatlander, 2014-04-27, 20:27
    - there is the standard bodyguard and the M&P bodyguard - - Art, 2014-04-28, 06:43

Stonewalrus, and BHP'ers et al - MR, 2014-04-26, 17:10
- BHPs is me - Catoosa, 2014-04-26, 20:59

A little busy lately..... - Gunner, 2014-04-26, 14:47
- I like the lines of the top one. - MR, 2014-04-26, 16:23
  - Reminiscent of a Randall...... - Otony, 2014-04-26, 19:49
- A little busy lately..... - BobM, 2014-04-26, 17:41
- A little busy lately..... - Cherokee, 2014-04-26, 18:39
- A little busy lately..... - RidinLou, 2014-04-26, 20:26
  - Absolutely!!! - Kentucky, 2014-04-27, 09:02
  - I agree - I definitely like the looks of #7 - stonewalrus, 2014-04-27, 09:25
- Nice work Gunner. - Hoot, 2014-04-28, 09:46

I'm thinking...Hmmm... - MR, 2014-04-26, 09:24
- looks like going to have a - Todd C, 2014-04-26, 11:24
- I'm thinking...Hmmm... - Cherokee, 2014-04-26, 11:30
- Magazine in backwards? - Bj2, 2014-04-26, 13:26
- Ya' think..... - Murphy, 2014-04-26, 14:36
  - Ya' think..... - Drago, 2014-04-26, 16:12

The Whelen Bug - Dave B, 2014-04-26, 09:17
- Bro' Dan has one. - Hoot, 2014-04-28, 09:48
  - Bro' Dan has one. - Dave B, 2014-04-28, 10:06
    - You know my brother too? - Hoot, 2014-04-28, 10:18
      - You know my brother too? - Dave B, 2014-04-28, 11:09
        
        Thank you for the kind words Dave. - Hoot, 2014-04-30, 06:44

FS: Ruger NM Bisley, 32 H&R mag - matt/pa, 2014-04-25, 21:23
- I'll bite! - Rob Leahy, 2014-04-25, 21:49
  - I'll bite! - Jared, 2014-04-25, 22:24
- Sold to Rob Leahy. Thanks! - matt/pa, 2014-04-25, 22:04
- I have one of these - cubrock, 2014-04-25, 23:31

Breeding a Society of Sheep - stonewalrus, 2014-04-25, 08:36
- I believe I'll use the ominous, dreaded . . . - Kentucky, 2014-04-25, 08:41
  - I believe I'll use the ominous, dreaded . . . - Catoosa, 2014-04-25, 09:40
    - It's the man, not the machine - John K., 2014-04-26, 00:29
- Breeding a Society of Sheep - Cherokee, 2014-04-25, 15:02
  - Gotta get me one of those bigger ,45 inch staplers... - stonewalrus, 2014-04-26, 12:25
- There is a way - RidinLou, 2014-04-26, 20:29

Brought home the "Holy Grail" of firearms last night..... - Byron, 2014-04-25, 08:21
- Horrors! The dreaded EBP - Catoosa, 2014-04-25, 09:10
- You'll need a Raven to go with it...maybe a sawed off M60 - Rob Leahy, 2014-04-25, 09:30
  - You'll need a Raven to go with it...maybe a sawed off M60 - Catoosa, 2014-04-25, 09:46
  - Are ya'll knocking the Raven? GRIN - D.Sikes, 2014-04-25, 11:32
    - They are part of the whole gand banging picture...Byron - Rob Leahy, 2014-04-25, 15:04
  - You'll need a Raven to go with it...maybe a sawed off M60 - Drago, 2014-04-25, 18:21
    - ...complete with razor cut Number 8s... - Rob Leahy, 2014-04-26, 11:40
- Brought home the "Holy Grail" of firearms last night..... - Cherokee, 2014-04-25, 13:03
- Being a child of the 80's... - Slow Hand, 2014-04-25, 14:53
  - :-) - Rob Leahy, 2014-04-25, 15:34
  - LOL. Love the idea. NM - bpjon, 2014-04-25, 16:17
- I just worked on one for a friend... - Sarge, 2014-04-25, 17:01
- Yes! Nobody has ever run out of ammo with one of those. In - brionic, 2014-04-25, 18:09
- Silly me, I pictured a S&W M27-2 with 3 1/2 inch barrel - Jeff Taylor, 2014-04-25, 20:39
  - Silly me, I pictured a S&W M27-2 with 3 1/2 inch barrel - Lee J., 2014-04-25, 22:25
- Brought home the "Holy Grail" of firearms last night..... - AkRay, 2014-04-26, 10:11

Mark Hargrove - Gary G, 2014-04-24, 19:45
- My opinion - Flatlander, 2014-04-24, 21:50
  - My opinion - ~JM~, 2014-04-25, 09:39
    - I think it would do fine, but - - Flatlander, 2014-04-25, 14:22
      - Pretty much the same conclusion... - rob, 2014-04-27, 15:34
    - if you go back in history... - bj2, 2014-04-25, 14:27
- Thanks for the info. - Gary G, 2014-04-25, 19:27

Name that gun. - Slow Hand, 2014-04-24, 19:12
- Looks like a custom commercial 98 Mauser to me - nm - cubrock, 2014-04-24, 20:26
- I would bet pretty seriously on '98 Mauser. - Hoot, 2014-04-24, 22:30
- I agree with... - Brian A, 2014-04-25, 09:09
- Orbendorf Mauser Sporter - Charles, 2014-04-25, 10:22
  - Orbendorf Mauser Sporter, I'd agree - Todd C, 2014-04-26, 09:22

Why is GP 100 not offered in 44 Special? - Art, 2014-04-24, 17:40
- Because Jeff hasn't told Ruger to do it. - MR, 2014-04-24, 18:41
  - Damn straight. - Drago, 2014-04-24, 23:44
- I have one... - matt/pa, 2014-04-24, 18:48
- I have always wondered that as well - stonewalrus, 2014-04-24, 19:44
  - JT has been on Ruger - Bud, 2014-04-26, 09:26
    - My son has the GP. I have a Security Six. - stonewalrus, 2014-04-26, 09:29
- Why is GP 100 not offered in 44 Special? - RidinLou, 2014-04-26, 20:33

.45 colt range day - Tom Richardson, 2014-04-24, 10:42
- .45 colt range day - Fowler, 2014-04-24, 13:33
- .45 colt range day - Art, 2014-04-24, 17:44
- Good stuff, Tom. Classy revolvers, and fancy shooting. - brionic, 2014-04-24, 19:53
  - Good stuff, Tom. Classy revolvers, and fancy shooting. - Tom Richardson, 2014-04-24, 19:59
- .45 colt range day - Cherokee, 2014-04-24, 19:58
- Looks like a fun day... - Brian A, 2014-04-25, 09:14
  - Looks like a fun day... - ~JM~, 2014-04-25, 09:45
- Very nice :-) - mcassill, 2014-04-27, 04:04

Tru Ivory/ Bar S Grips - Drago, 2014-04-24, 10:29
- Tru Ivory/ Bar S Grips - ~JM~, 2014-04-25, 09:46

Any readers of C.J. Box - Art, 2014-04-23, 16:08
- Good writer, increasingly recognized the literary sorts... - John Meeker, 2014-04-23, 18:57
  - Read just about everything he's written - Scribe, 2014-04-24, 07:32
    - Agree..Joe Pickett's are his best... - John Meeker, 2014-04-24, 10:27
      - That one was a waste of time/nm - Scribe, 2014-04-24, 13:09
- Have read all of the Joe Pickett's ... - Flatlander, 2014-04-24, 13:24

Went to my Gun Store today - Art, 2014-04-23, 16:03
- Rossi Mod. M-720......... - Ron Brown, 2014-04-23, 16:41
- Went to my Gun Store today - Paul, 2014-04-23, 17:52
  - I shot Paul's Taurus when he was in MN a few years back. - Hoot, 2014-04-23, 20:48
- Price seems about $75-100 high. - Andrew, 2014-04-23, 18:12
- i have had one for years, like it so much i got another one - cable, 2014-04-23, 19:02
  - got my recent one for 350, and saw another one for that - cable, 2014-04-23, 19:08
    - got my recent one for 350, and saw another one for that - Art, 2014-04-23, 19:37
      - I agree - cable, 2014-04-23, 19:49
      - I bought a stainless 431? about 10 years ago for $175 - Bob Hatfield, 2014-04-23, 19:50
        
        I bought a blue 3" model 431 many years ago.. - Kentucky, 2014-04-24, 10:14
- Went to my Gun Store today - Warhawk, 2014-04-23, 21:27
- local forum has this Rossi for sale at $380: - cable, 2014-04-24, 11:15
- I'm thinking te 441 is a modern version in 44 mag - RidinLou, 2014-04-25, 18:00

Any interest in a nice Colt Woodsman? - Paul, 2014-04-23, 15:39
- That is a nice Woodsman. - Hoot, 2014-04-23, 20:50

I wouldn't even know how to accurately measure THIS - brionic, 2014-04-23, 10:18
- Watch those mall ninjas - Fowler, 2014-04-23, 11:21
  - Ha! For the win. - brionic, 2014-04-23, 11:27
- Gotta love those guys - mcassill, 2014-04-23, 14:19
- Remind me to comment on that next time I see you in person - MR, 2014-04-23, 14:30
- When you're that good, you don't need to steenkin measure... - Hoot, 2014-04-23, 21:21
  - Former (THANKFULLY) BIL told me he had a rifle - stonewalrus, 2014-04-24, 05:39

The Prayers Worked!!!!!!!!!! - Art, 2014-04-22, 19:00
- Outstanding Art !!!!!!!!!!!!!!! - Gary G, 2014-04-22, 19:07
- Very good! - Rob Leahy, 2014-04-22, 19:24
- Great news!!! - Slow Hand, 2014-04-22, 19:35
- Praise God! - cubrock, 2014-04-22, 19:36
- Wonderful!! - stonewalrus, 2014-04-22, 19:50
  - Wonderful!! - Lee J., 2014-04-22, 20:12
- Excellent!! - John K., 2014-04-22, 20:26
- Praise God! - Paul, 2014-04-22, 20:55
- The Prayers Worked!!!!!!!!!! - Cherokee, 2014-04-22, 20:58
- Excellent! Dinner for two, with candles. - brionic, 2014-04-22, 22:05
- that is a cure as far as i am concerned ! WONDERFUL,,, - cable, 2014-04-22, 23:49
- That is wonderful!! - Hoot, 2014-04-23, 06:41
- Yes, absolutely wonderful. - Hobie, 2014-04-23, 07:36
- VERY good news!!!! - TomC, 2014-04-23, 07:55
- Great News! - MR, 2014-04-23, 08:44
- That is wonderful!! - mcassill, 2014-04-23, 09:19
- That is indeed great news! - rob, 2014-04-24, 20:57

We have one of the titanium frame S&W .32 HRs in - Hobie, 2014-04-22, 14:31
- We have one of the titanium frame S&W .32 HRs in - uncowboy, 2014-04-22, 16:32
- what is barrel length? adjustable sights? - cable, 2014-04-22, 17:42
  - It is the 1-7/8" fixed sight model. Can't remember the - Hobie, 2014-04-22, 18:23
- Somebody put on one of the belt clips that uses attachment - Hobie, 2014-04-22, 18:25
  - Price & Pictures? - Rob Leahy, 2014-04-22, 18:53
    - I think he's asking $780-something. If you're really - Hobie, 2014-04-23, 05:33
      - it's ok, I thought other folks might be interested... - Rob Leahy, 2014-04-23, 16:51
- That'd be the 331 or 332, correct? nt - Paul, 2014-04-22, 21:01
  - i got a kit gun with sdjustable sights 3" bbl in 327 federal - cable, 2014-04-22, 23:51
  - 332 I think... - Hobie, 2014-04-23, 05:31
- I have the non-Ti Airweight, Model 432. - Hoot, 2014-04-23, 06:44
  - I have a Model 432 as well. - Otony, 2014-04-23, 08:25
    - Yep. I would guess at least part of the 'snap' is... - Hoot, 2014-04-23, 20:53

Rebuilt 38 Target Masterpiece - DeeBee, 2014-04-22, 11:18
- Rebuilt 38 Target Masterpiece - Cherokee, 2014-04-22, 13:02
- Nicely done. I set up a target Masterpiece for my - Rob Leahy, 2014-04-22, 13:35
- Very purposeful. - Hoot, 2014-04-23, 06:46
  - Very purposeful. - Me, 2014-04-23, 11:41
    - Very good. - Hoot, 2014-04-23, 12:06

Honey Badger escape artist - Rob Leahy, 2014-04-22, 10:16
- would make an awesome guard ' dog' - cable, 2014-04-22, 13:28
- someone needs to invest in an electric hot wire - Gary G, 2014-04-22, 19:16
- Enjoyable video. Thanks! - Hoot, 2014-04-23, 06:47
- Reminds me of a blue heeler I know... - rob, 2014-04-24, 21:13

M&P pro 9mm dealers cost? - Brien1, 2014-04-22, 09:07
- M&P pro 9mm dealers cost? - Otony, 2014-04-23, 09:49
  - Not the core Thanks - Brien1, 2014-04-23, 11:07
    - Davidsons dealer price before shipping is..... - Otony, 2014-04-23, 17:26
      - That helps Thank You - Brien1, 2014-04-23, 18:10

TCM is showing John Wayne westerns all day today. (Nm) - Boge Quinn, 2014-04-22, 07:56
- Commericasl free; the only way I will sit in front of a tv - Rob Leahy, 2014-04-22, 13:37