The Frontier Sixshooter Community Message Board

S&W Shield question for Rob L, but others as well - Slow Hand, 2015-03-13, 20:40
- S&W Shield question for Rob L, but others as well - Brien1, 2015-03-13, 23:28
- I don't like the 40 S&W Shield as much as the 9mms. just a - Rob Leahy, 2015-03-14, 10:52
- I've shot the Nine plenty, but the Fotay is...... - Otony, 2015-03-14, 14:26
- S&W Shield question for Rob L, but others as well - Sarge, 2015-03-14, 19:41
  - There he is! Just in time for CSA! - Rob Leahy, 2015-03-14, 20:02
    - There he is! Just in time for CSA! - Don Sikes, 2015-03-14, 20:08
    - I debated between a 40 Shield and a Springfield XDS - stonewalrus, 2015-03-14, 20:51

CSA information needed - Tom Richardson, 2015-03-13, 19:09
- Dun did dat. But for the record. - MR, 2015-03-13, 22:20

G10 what exactly is it? - StoneWolf, 2015-03-13, 14:32
- It's a phenolic laminate - Miles, 2015-03-13, 14:48
- From: KnifeCenter.com - Hoot, 2015-03-13, 14:50
  - Thanks guys - StoneWolf, 2015-03-13, 15:07
- somewhat similar to Micarta - bj, 2015-03-15, 00:03

Well, OK then, umm, what? - Hoot, 2015-03-13, 07:06
- Well, OK then, umm, what? - Brian A, 2015-03-13, 08:34
  - Well, OK then, umm, what? - Slow Hand, 2015-03-13, 20:43
    - Well, OK then, umm, what? - Brian A, 2015-03-15, 11:21
- Oy Vei! - MR, 2015-03-13, 10:19
- Well, OK then, umm, what? - stonecoldrc, 2015-03-13, 11:23
- For shooting very small Spaniards? - John Meeker, 2015-03-13, 12:17

Prayer request... - Hobie, 2015-03-12, 22:34
- Done - Dave B, 2015-03-13, 01:13
- Prayer request... - Slow Hand, 2015-03-13, 03:59
- Done - stonewalrus, 2015-03-13, 05:12
- Of course Hobie. - Hoot, 2015-03-13, 07:07
- Prayer request... - Cherokee, 2015-03-13, 07:21
- Prayer request... - Tom Richardson, 2015-03-13, 07:31
- Done. - Wildcat, 2015-03-13, 08:19
- Hobie, I will keep him in my thoughts. I just had the same - TomC, 2015-03-13, 08:58
- Said - Creeker, 2015-03-13, 14:15
- Done... - Brian A, 2015-03-13, 16:23
- got it going on. - Rob Leahy, 2015-03-13, 17:44
- Thank you all. He is safely out of surgery and - Hobie, 2015-03-13, 18:57
- Prayer request... - Art, 2015-03-13, 19:54

From Cherokee [Pics] - Creeker, 2015-03-12, 20:34
- From Cherokee [Pics] - Cherokee, 2015-03-13, 07:27
  - From Cherokee [Pics] - Creeker, 2015-03-13, 14:18

41 Long Colt moulds..... - Harry O-1, 2015-03-12, 19:46

In an effort to streamline selling all my 44 & 45s and - Rob Leahy, 2015-03-12, 18:26
- Hapy birthday.... - Harry O-1, 2015-03-12, 19:34
- Happy Birthday and many more where that came from!! - stonewalrus, 2015-03-12, 19:34
- Listen up old man. - Andrew, 2015-03-12, 19:46
  - like a steel rod througha pane of glass. - Rob Leahy, 2015-03-12, 20:08
- Happy Birthday Rob!!! - TomC, 2015-03-12, 19:58
  - Happy Birthday Rob!!! - Drago, 2015-03-13, 09:53
- In an effort to streamline selling all my 44 & 45s and - Tom Richardson, 2015-03-12, 20:12
- Happy Birthday Rob. - MR, 2015-03-12, 21:27
- Happy Birthday! - Dave B, 2015-03-13, 01:11
- All you need is a Bryco.....donate the rest.... H-B-Day. - John Meeker, 2015-03-13, 06:26
- DIBS!! - Hoot, 2015-03-13, 07:07
- Happy Birthday !! - Cherokee, 2015-03-13, 07:18
- .25 ACP is the way to go... - mcassill, 2015-03-13, 07:54
- In an effort to streamline selling all my 44 & 45s and - Wildcat, 2015-03-13, 08:21
- In an effort to streamline selling all my 44 & 45s and - jgt, 2015-03-13, 10:36
  - In an effort to streamline selling all my 44 & 45s and - Ken O'Neill, 2015-03-13, 13:45
- HAPPY Birthday! - Hobie, 2015-03-13, 18:58
- In an effort to streamline selling all my 44 & 45s and - Art, 2015-03-13, 19:52
- Happy Birthday my friend... GRIN - Don Sikes, 2015-03-16, 18:01

Ogden Area Questions - Dave B, 2015-03-12, 13:44

Any CSA attendee have an S&W Shield of the 9mm persuasion? - Hoot, 2015-03-11, 16:21
- I have had two 9s and 40 and gals all stole em from me after - Rob Leahy, 2015-03-12, 00:13
  - It was your reviews that got us pointed in that direction in - Hoot, 2015-03-13, 07:11
- Any CSA attendee have an S&W Shield of the 9mm persuasion? - Slow Hand, 2015-03-13, 03:42
  - Thank you Doug. - Hoot, 2015-03-13, 07:10
    - I shot his Shield last fall... - mcassill, 2015-03-13, 07:51

Just made CSA reservations for the dog and cats - MR, 2015-03-11, 15:53
- Hee Hee Hee - Hoot, 2015-03-11, 16:22
  - Hee Hee Hee - MR, 2015-03-11, 18:02
    - I will be VERY happy to finally meet her! - Hoot, 2015-03-11, 20:52
  - Hee Hee Hee - Ken O'Neill, 2015-03-12, 06:37
    - Yep! - Hoot, 2015-03-13, 07:11

American Reloaders Association - old pubs - Cherokee, 2015-03-11, 10:51
- American Reloaders Association - old pubs - lee e. jurras, 2015-03-11, 11:25
  - Right, Lee, my typo - corrected - Cherokee, 2015-03-11, 11:40
- American Reloaders Association - old pubs - Otony, 2015-03-11, 14:02
  - They are yours - - Cherokee, 2015-03-11, 16:18
    - Otony - haven't heard from you - Cherokee, 2015-03-12, 17:34
      - Otony - haven't heard from you - Otony, 2015-03-12, 18:56

Sooo...anyone for a Pukka Sahib No4-2 Enfield "KIT" ? - John Meeker, 2015-03-10, 21:43
- I don't need another but your post certainly caught my - Hobie, 2015-03-10, 21:59
  - Why, thank you...Enfileds have always been a fun for me.. - John Meeker, 2015-03-11, 11:27
    - You know (I suspect) how I feel about these things John. - Hoot, 2015-03-11, 16:24
      - these things .... - John Meeker, 2015-03-11, 17:54
        
        these things ...might be on of these.... - John Meeker, 2015-03-12, 10:31
        
        I will drop you a note John. - Hoot, 2015-03-13, 07:12

More on the ammo bans... - Big Six, 2015-03-10, 16:48

Ruger 77/357 experience - Josh Maloley, 2015-03-10, 16:28
- Ruger 77/357 experience - Otony, 2015-03-10, 20:59
  - Ruger 77/357 experience - Glen, 2015-03-11, 16:35
    - Ruger 77/357 experience - uncowboy, 2015-03-11, 16:51
    - Ruger 77/357 experience - Slow Hand, 2015-03-13, 04:06
- ULTIMATE Ruger 77/357 experience - bob, 2015-03-11, 17:42
  - ULTIMATE Ruger 77/357 experience - John Meeker, 2015-03-11, 19:48
  - ULTIMATE Ruger 77/357 experience - Slow Hand, 2015-03-13, 04:03
- I have seen exactly one. - Hoot, 2015-03-13, 07:15

Colorado (hope this one works) - Big Six, 2015-03-10, 15:57

Security Six grip alum grip adapter wanted --- - John Meeker, 2015-03-10, 11:10
- Security Six grip alum grip adapter wanted --Tyler-Ts - John Meeker, 2015-03-10, 12:19
- It's a Tyler No. 8 you seek. - Hoot, 2015-03-10, 13:41
  - It's a Tyler No. 8 you seek. - John Meeker, 2015-03-10, 21:58
    - I might have a #8 as well. I sold a couple, used a couple.. - Hobie, 2015-03-10, 22:02
- Security Six grip alum grip adapter wanted --- - Catoosa, 2015-03-11, 10:02
  - Thanks for the shared experience..... - John Meeker, 2015-03-12, 10:21
- No go on the Tyler #8 here. - Hoot, 2015-03-11, 16:26
  - Very safe place -- yup, when I find the one I have, - John Meeker, 2015-03-12, 10:24

BJ Snow bowie and Les Baer 1911 - Rob Leahy, 2015-03-09, 23:15
- Could you post a picture of what the stud looks like? - stonewalrus, 2015-03-10, 05:30
  - It is simply a brass stud as used on flap holsters since - Rob Leahy, 2015-03-10, 10:28
  - Picture of the stud: - brionic, 2015-03-10, 10:29
    - HAHAH! - Rob Leahy, 2015-03-10, 11:26
- BJ Snow bowie and Les Baer 1911 - Catoosa, 2015-03-10, 09:59
  - Yes...and So do I! this was done from a S80 Commander - Rob Leahy, 2015-03-10, 10:23
    - Watch yor fingers around that edge! - Miles, 2015-03-10, 11:05
      - Yep, EVERYtime someone grabs it they let their fingers - Rob Leahy, 2015-03-10, 11:27
        
        nobody is going to grab it trying to take it away from you - stonewalrus, 2015-03-10, 11:49
    - That Commander does look slick - Catoosa, 2015-03-11, 09:47
  - BJ Snow bowie and Les Baer 1911 - uncowboy, 2015-03-10, 14:49
- Rob, what do you think is the practical maximum length - stonewalrus, 2015-03-11, 08:48
  - I have been carrying this 11 inch blade for about 2 years - Rob Leahy, 2015-03-11, 09:33
    - Are you sure that isn't a short sword? - stonewalrus, 2015-03-11, 11:09
      - I would be afraid if I ever had to use it in defense an 11" - stonewalrus, 2015-03-11, 12:02
- Rob, do you clank when you walk? - stonewalrus, 2015-03-11, 14:31
  - Blade length...Bowies were outlawed in Alabama...because of - Rob Leahy, 2015-03-12, 11:40

Neck knife experiment...... - Gunner, 2015-03-09, 21:55
- Neck knife experiment...... - jgt, 2015-03-10, 11:04
  - Neck knife experiment....ir ain't easy to run grinders..'''' - John Meeker, 2015-03-10, 11:14
    - Neck knife experiment....ir ain't easy to run grinders..'''' - uncowboy, 2015-03-10, 14:47

Uncowboy - 550B - Cherokee, 2015-03-08, 20:03
- Uncowboy - 550B - uncowboy, 2015-03-09, 05:26
  - Glad it it found a good home! - Rob Leahy, 2015-03-09, 10:50
    - I need that... I'm still using a Lee hand press, good news - StoneWolf, 2015-03-09, 15:21
      - I need that... I'm still using a Lee hand press, good news - uncowboy, 2015-03-09, 16:23

EVERYTHING I OWN HAS A CLOCK IN IT! - bob, 2015-03-08, 09:55
- I feel your pain - Creeker, 2015-03-08, 14:14
- EVERYONE TALKS CLOCKS! WHAT IS A CLOCK?! nt - passing by, 2015-03-08, 14:23
- EVERYTHING I OWN HAS A CLOCK IN IT! - Cherokee, 2015-03-08, 14:32
  - Not interested in time..... - Bud, 2015-03-09, 09:31
- EVERYTHING I OWN HAS A CLOCK IN IT! - Mark, 2015-03-11, 06:09
  - I do not feel one way or the other regarding DST. - Hoot, 2015-03-11, 16:28
    - I like it, I would leave it that way year round - bj, 2015-03-11, 19:47

drive-by photo post attempt - passing by..., 2015-03-07, 19:39
- drive-by photo post attempt 2 - passing by, 2015-03-07, 19:41
  - photo info - passing by, 2015-03-07, 19:53
  - reference photo for curious - passing by, 2015-03-07, 20:38
    - more of same - passing by, 2015-03-07, 20:52
      - more of same - stonecoldrc, 2015-03-08, 05:48
        
        ok. More. - passing by, 2015-03-08, 13:45
        
        much more like originals - passing by, 2015-03-08, 13:55
        
        Wow. Some day! - brionic, 2015-03-10, 11:42
        
        easier than most think. - passing by, 2015-03-12, 06:57
        
        dealer recommendation - passing by, 2015-03-12, 07:10
        
        yours is a #14? - passing by, 2015-03-08, 14:19
  - Boom! Excellent blade. - brionic, 2015-03-08, 13:32
    - Boom! you are right. nt - passing by, 2015-03-08, 14:02

Rain & the 357 - Creeker, 2015-03-07, 13:11
- Rain & the 357 - uncowboy, 2015-03-07, 14:42
  - Creeker ..Do you shoot your converted 44special you told me - Gary G, 2015-03-07, 17:53
    - Creeker ..Do you shoot your converted 44special you told me - Creeker, 2015-03-07, 18:22
- Out today - Creeker, 2015-03-07, 18:15
  - Out today - Bob Hatfield, 2015-03-08, 07:06
- Rain & the 357 - Bob Hatfield, 2015-03-08, 07:08

Nashville NRA Convention - anybody coming? - stonewalrus, 2015-03-07, 12:39
- Yep! We will be working. - Boge Quinn, 2015-03-07, 12:49
  - you will be roaming rather than have a booth I assume - stonewalrus, 2015-03-07, 13:19
    - That is correct. We will be roaming... - Boge Quinn, 2015-03-07, 20:35
      - That is correct. We will be roaming... - Ken ONeill, 2015-03-08, 07:38
- Won't make it this year for various reasons. Hope to do - Hobie, 2015-03-07, 14:03
  - I doubt I'll get another chance for it to be this close - stonewalrus, 2015-03-07, 15:22
    - That's what we said when it was at Charlotte... - Hobie, 2015-03-07, 19:55
      - I will try. I wish I could get a layout of the place - stonewalrus, 2015-03-07, 20:10
        
        There will be a map handed out when you enter the hall or - Hobie, 2015-03-07, 20:35
        
        It is more laid-back and FUN... - Boge Quinn, 2015-03-07, 20:37
- Nashville NRA Convention - anybody coming? - Butch Kent, 2015-03-20, 22:08

Back in the saddle again.... - TomC, 2015-03-07, 07:35
- I am very happy to see you back Tom. - Hoot, 2015-03-07, 07:56
- You know we'd like to hear from you now and then... - Hobie, 2015-03-07, 08:25
- Back in the saddle again.... - Paul, 2015-03-07, 09:00
- Back in the saddle again.... - Cherokee, 2015-03-07, 09:25
- Good to see you post, Tom. - Cannon, 2015-03-07, 09:56
- Back in the saddle again.... - jgt, 2015-03-07, 10:01
- Good news! Glad you're home. - brionic, 2015-03-07, 10:23
- Good to see your post! - Murphy, 2015-03-07, 11:11
- Glad to have you back - Creeker, 2015-03-07, 12:54
- Back in the saddle again.... - Gary G, 2015-03-07, 17:47
- Glad to see you up and around! - mcassill, 2015-03-07, 18:00
  - AMEN!! - Hoot, 2015-03-07, 22:51
  - I'm going to try and at least catch the floor show this year - TomC, 2015-03-08, 08:31
- Great to know that you did fine. get well soon. - Rob Leahy, 2015-03-09, 15:26

I need some 357 brass - Fowler, 2015-03-06, 19:46
- Having trouble finding it too or it's ridiculously overprice - StoneWolf, 2015-03-06, 20:46
- Ran into this... - Hoot, 2015-03-08, 10:21
- I need some 357 brass - Dave B, 2015-03-10, 13:02

Off topic - Ice Scrapers - stonewalrus, 2015-03-06, 13:28
- Being a hobbit...... - Otony, 2015-03-06, 15:46
  - I'm going to see if I can find a pvc pipe the right size to - stonewalrus, 2015-03-06, 19:01
    - I'm going to see if I can find a pvc pipe the right size to - Otony, 2015-03-06, 21:36
      - 1" pvc pipe should work for the Kabar. - stonewalrus, 2015-03-06, 22:29

Maryland - Big Six, 2015-03-06, 11:25
- Maryland - Murphy, 2015-03-07, 11:12

Any recommendations for fire-forming a Hornet sized case? - Hoot, 2015-03-06, 08:37
- Any recommendations for fire-forming a Hornet sized case? - uncowboy, 2015-03-06, 09:46
- Any recommendations for fire-forming a Hornet sized case? - WIL TERRY, 2015-03-06, 10:25
- Any recommendations for fire-forming a Hornet sized case? - Paul, 2015-03-06, 11:09
- Thanks guys! - Hoot, 2015-03-07, 07:06

S&W M-19 - LAH, 2015-03-05, 20:41
- S&W M-19 - Kings6, 2015-03-05, 23:00
  - S&W M-19 - Creeker, 2015-03-07, 12:58
- Hmmm....in 300 rounds huh? - Hoot, 2015-03-06, 08:40
  - Hmmm....in 300 rounds huh? - Creeker, 2015-03-07, 12:59
- And how many old model 29s have been shot apart with - Fowler, 2015-03-06, 09:04
  - And how many old model 29s have been shot apart with - Creeker, 2015-03-07, 13:01
- Much as I like S&W....... - Otony, 2015-03-06, 09:28
  - Much as I like S&W....... - Creeker, 2015-03-07, 13:02
- Invoice dated January 1993 - Charles, 2015-03-06, 14:36
  - Invoice dated January 1993 - Creeker, 2015-03-07, 13:02
- S&W M-19 - Bob Hatfield, 2015-03-06, 18:50
  - S&W M-19 - Creeker, 2015-03-07, 12:58
    - S&W M-19 - Bob Hatfield, 2015-03-08, 07:12
      - S&W M-19 - Creeker, 2015-03-08, 07:30
- S&W M-19 - Butch Kent, 2015-03-20, 22:17