The Frontier Sixshooter Community Message Board

Vacation - uncowboy, 2015-05-02, 07:43
- Safe journeys - ERSisk, 2015-05-02, 09:19
- Vacation - Cherokee, 2015-05-02, 20:55

Found a custom case maker - Fowler, 2015-04-30, 14:08
- I am pretty sure I met him at Tulsa one year - cubrock, 2015-04-30, 14:34
  - I am pretty sure I met him at Tulsa one year - Fowler, 2015-04-30, 14:43
    - I am pretty sure I met him at Tulsa one year - cubrock, 2015-04-30, 15:44

Anti-gunner irony - stonewalrus, 2015-04-29, 22:11
- A liberal is a conservative who hasn't been mugged yet. - Miles, 2015-04-29, 23:24
  - would you believe Illinois - where you have to have a - stonewalrus, 2015-04-30, 06:00
    - Yes, I'm well aware of the FOID requirement - Miles, 2015-04-30, 07:44
  - Unfunny how this works - brionic, 2015-04-30, 09:08
    - Brian, you hit it on the head. - Rob Leahy, 2015-04-30, 10:05
    - I don't understand any location - bj, 2015-04-30, 19:54
      - Not criminals but special interest groups and - brionic, 2015-04-30, 22:48
        
        Not criminals but special interest groups and - Jon, 2015-05-02, 23:05
        
        Bingo! - brionic, 2015-05-03, 10:06

Tulsa Gun Show thieves caught...3 long time venders... - Rob Leahy, 2015-04-29, 16:48
- Seems like they'll be handling plenty of "big guns" - brionic, 2015-04-30, 09:16
- Tulsa Gun Show thieves caught...3 long time venders... - Cherokee, 2015-04-30, 13:04
  - Tulsa Gun Show thieves caught...3 long time venders... - Wildcat, 2015-05-01, 11:14
    - one of them had a gun that was reported stolen in 1995 - stonewalrus, 2015-05-01, 12:00

From the horses mouth. - ERSisk, 2015-04-27, 23:09
- cartridge? - bj, 2015-04-28, 19:48
  - Sorry did not carry info over from an earlier post - ERSisk, 2015-04-28, 23:45

1937 Smith - Slow Hand, 2015-04-27, 16:05
- I will check and see what I can find for you. - Rob Leahy, 2015-04-27, 17:47
- 1937 Smith - Jared, 2015-04-27, 18:06
- 1937 Smith - bj, 2015-04-27, 19:22
- OKAy I located a 1955 Target barrel... - Rob Leahy, 2015-04-27, 21:19
  - OKAy I located a 1955 Target barrel... - Slow Hand, 2015-04-27, 21:49
    - I'll speak to the owner again tomarrow. - Rob Leahy, 2015-04-27, 23:25
- 1937 Smith - Catoosa, 2015-04-28, 08:54
  - THAT is usefull information, right there... - Rob Leahy, 2015-04-28, 11:43
- 1937 Smith - jgt, 2015-04-28, 09:56
- You should try fire-lapping. - Byron, 2015-04-28, 11:18
  - You should try fire-lapping. - Slow Hand, 2015-04-28, 13:01
- Taurus made some spare barrels - Charles, 2015-04-28, 13:56
- 1937 Smith - Catoosa, 2015-04-29, 22:12

Hey Rob- - Catoosa, 2015-04-26, 23:33
- Pictures? - Rob Leahy, 2015-04-27, 18:35
  - Pictures? - Catoosa, 2015-04-28, 08:35
    - If you can email them to me I will post them for you - stonewalrus, 2015-04-28, 18:37

We have arrived in the North West. - Andrew, 2015-04-26, 21:57
- Glad to see that you made the trip ok. - Fivegunner, 2015-04-27, 03:27
- I know that this move must have been stressfull for you - Rob Leahy, 2015-04-27, 09:23
  - " One or two gun guys are Boise as well... " - Otony, 2015-04-27, 11:34
    - Family acquaintance continues to believe we live in - brionic, 2015-04-27, 14:38
- Congratulations! - Dave B, 2015-04-28, 13:57

Looking for a S&W 15 4" - SKgrips, 2015-04-26, 17:01
- Looking for a S&W 15 4" - Slow Hand, 2015-04-26, 20:52
  - Looking for a S&W 15 4" - Slow Hand, 2015-04-26, 20:54
    - Looking for a S&W 15 4" - SKgrips, 2015-05-02, 11:30

Hog 1-2-3 down...... - Gunner, 2015-04-26, 16:43
- Cool! Lots a BBQ... is that a H&R Officer Model Trapdoor ? - Rob Leahy, 2015-04-26, 22:06
  - It sure is! - mcassill, 2015-04-27, 05:58
    - That was a nice rifle.... - TomC, 2015-04-27, 07:25
  - Yep. That's buddy Ray. - Hoot, 2015-04-27, 12:12
- Hog 1-2-3 down...... - Jared, 2015-04-27, 18:14
- Looks like good fun... - Brian A, 2015-04-28, 08:56

Hog Hunt 2015 - TomC, 2015-04-26, 14:44
- WOW, I would not want to be hunted by this group!!! - Fivegunner, 2015-04-26, 16:29
  - I want to hear about Miss Melodie's rig. - MR, 2015-04-27, 09:34
    - "rig" or pig? - Hoot, 2015-04-27, 09:40
      - Pig Story requested at your convenience! - MR, 2015-04-27, 10:27
        
        "It was a dark and stormy night..." - Hoot, 2015-04-27, 12:09
        
        That lady needs some tusk jewlery made from HER HOG! - MR, 2015-04-27, 16:35
        
        "It was a dark and stormy night..." - Jared, 2015-04-27, 18:10
        
        great! By next year she'll be ready to use the Bowie... - Rob Leahy, 2015-04-27, 23:46
        
        Excellent story tellin' - Brian A, 2015-04-28, 09:04

"Use enough bullet" - mcassill, 2015-04-26, 12:08
- I was quite surprised it took this long to say NO - TomC, 2015-04-26, 13:35
  - I don't get why people use such an inadequate round... - mcassill, 2015-04-26, 21:33
- "Use enough bullet" - Jared, 2015-04-27, 18:15

Any one have any load data for Barnes XFB 350 gr. .411 in a - ERSisk, 2015-04-25, 22:40
- Loaddata.com - Dave B, 2015-04-28, 14:03

Rob, Holster arrived, Perfect in everyway. Thank you - ERSisk, 2015-04-25, 22:18
- My pleasure! - Rob Leahy, 2015-04-26, 14:15

FS: H&R Sportsman, 22 LR, 9-shot, SINGLE ACTION (model 199) - matt/pa, 2015-04-25, 19:42

FS: Taylor's 1892 44 mag Alaskan, 16" bbl, takedown, NIB - matt/pa, 2015-04-25, 19:24

Remington Model 1894 SXS Hammerless Double - jgt, 2015-04-25, 18:12
- I'd be very careful - Bud, 2015-04-26, 12:27
  - I'd be very careful - Sarge, 2015-04-26, 20:34
- Remington Model 1894 SXS Hammerless Double - jgt, 2015-04-27, 09:24

Ruger Bisley - Dave B, 2015-04-25, 10:25
- Ruger Bisley - uncowboy, 2015-04-25, 16:05
  - Here.. - cas, 2015-04-25, 16:28
    - Thanks! - Dave B, 2015-05-02, 00:22
- what about the "poor man's trigger job"? - bj, 2015-04-25, 19:42
  - "poor man's trigger job" FINALLY FAILED - SIXGUNNER, 2015-04-25, 20:01
  - I always do this - Dave B, 2015-04-26, 09:26
    - On my NM flattop I found that the poorboy's - BC, 2015-04-26, 13:32
      - On my NM flattop I found that the poorboy's - Slow Hand, 2015-04-26, 16:25

Basic thoughts on Browning BLR? - rob, 2015-04-24, 21:59
- I like mine - BC, 2015-04-25, 09:42
  - I'm kinda thinking it will... - rob, 2015-04-25, 12:04
    - Limitations, in my mind: - BC, 2015-04-25, 13:32
- Ifn you wanted a .270 - cubrock, 2015-04-25, 15:43
  - I appreciate that but... - rob, 2015-04-25, 16:03
    - I hear you - cubrock, 2015-04-25, 16:06

as long as we are on AR's Colt HBar II trigger question. - MR, 2015-04-24, 13:20
- You may not have to grind out the sear block... - mcassill, 2015-04-24, 13:56
  - Thanks Mark! - MR, 2015-04-24, 16:14
- No dice on Springfield - BC, 2015-04-24, 17:26
  - Thank you. - MR, 2015-04-24, 17:38
- If you're going to spend that much for triggers... - Miles, 2015-04-24, 18:21
  - I am very impressed with.... - rob, 2015-04-24, 21:44
    - when my guys brought in their personal ARs for work - Miles, 2015-04-24, 23:33
      - I JUST BUGHT - uncowboy, 2015-04-25, 16:01
        
        I find this very interesting. - cas, 2015-04-25, 16:32
        
        interesting. Tell me more - Miles, 2015-04-25, 19:18
        
        Can't really. - cas, 2015-04-25, 21:00
        
        hard to say without more infoo - Miles, 2015-04-25, 23:18
- How much work do you want to do? - bj, 2015-04-24, 19:34
  - I had a 3 pound Jewell in an AR-10 - MR, 2015-04-24, 20:09
- as long as we are on AR's Colt HBar II trigger question. - Slow Hand, 2015-04-26, 21:07

K-38 - Creeker, 2015-04-23, 19:11
- It doesn't get much better than that! (nm) - Glen, 2015-04-23, 19:16
- K-38 - Cherokee, 2015-04-23, 20:52
  - Lee Bullet - Creeker, 2015-04-23, 20:56
- K-38 - Brian A, 2015-04-24, 06:47

How about another AR question...free float vs. standard - rob, 2015-04-23, 12:53
- How about another AR question...free float vs. standard - uncowboy, 2015-04-23, 13:08
  - ^^^^^See Above^^^^^ - Miles, 2015-04-23, 13:21
- With the standard setup, sling or bipod... - mcassill, 2015-04-23, 13:26
  - I replaced a free float with the magpul and saved a - Cherokee, 2015-04-23, 13:32
    - For my son's Blackout I went with a simple... - mcassill, 2015-04-23, 13:58
      - That's exactly what I want. - rob, 2015-04-23, 14:00
      - The ones secured by screws to the barrel nut... - rob, 2015-04-23, 14:18
      - Is this the one... - rob, 2015-04-23, 15:52
        
        No, much more basic than that - mcassill, 2015-04-23, 16:03
        
        If you want to attach stuff... - mcassill, 2015-04-23, 16:09
        
        Like this... - mcassill, 2015-04-23, 16:13
        
        I'm not sure I like the Keymod stuff... - rob, 2015-04-23, 18:09
        
        Just how much force are you applying to your light? - mcassill, 2015-04-23, 18:23
        
        its not so much "how much force" as it is... - rob, 2015-04-23, 18:34
- How about another AR question...free float vs. standard - MDF99, 2015-04-24, 10:04
  - THAT is really cool! Nm - rob, 2015-04-24, 19:55
- If you are using a sling to shoot with - bj, 2015-04-24, 19:43

The Big Swede barks! - Hoot, 2015-04-23, 09:28
- How about the whole enchilada? - brionic, 2015-04-23, 12:44
- You're way ahead of me. - mcassill, 2015-04-23, 17:24
- The Big Swede barks! - Brian A, 2015-04-24, 06:53

Buybacks - Big Six, 2015-04-22, 11:05
- Bankrupting Buyback programs is fair game...I could see some - Rob Leahy, 2015-04-22, 11:22

It appears that Colt can't go broke competently either - mcassill, 2015-04-22, 07:13
- It's instructive how.... - rob, 2015-04-22, 08:23
  - Here Here - Creeker, 2015-04-23, 11:50

Never, never, ever... - Hoot, 2015-04-22, 06:43
- I'll buy the brass from you if that will help... - mcassill, 2015-04-22, 07:03
- Surely this isn't the first time you've done this... - Hobie, 2015-04-22, 07:07
  - Of course not! - Hoot, 2015-04-22, 07:57
- Sweet Dreams are made of these..... - John Meeker, 2015-04-22, 16:42
- If a fellow could find a reamer... - mcassill, 2015-04-22, 17:05
  - Interesting. - Hoot, 2015-04-23, 10:23
- What is even worse is if you buy a MOULD for..... - Harry O-1, 2015-04-25, 09:19

One more AR question: hammer pivot pin... - rob, 2015-04-21, 18:22
- in the middle of the hammer/trigger pin - Miles, 2015-04-21, 18:48
  - in the middle of the hammer/trigger pin - rob, 2015-04-21, 18:57
    - You gotz it - Miles, 2015-04-21, 19:03
      - It's pretty darned simple! - rob, 2015-04-21, 19:10
        
        You have a chassis - Miles, 2015-04-21, 19:22
        
        A Spanner combo tool with panash - Rob Leahy, 2015-04-21, 23:27
        
        What kind of madness is that? - Slow Hand, 2015-04-22, 04:07
        
        Well, I must admit that will be used much more than my - Rob Leahy, 2015-04-22, 10:45
        
        I kinda like it but being a gear head.... - rob, 2015-04-22, 11:08
        
        Your buddy needs to learn to transition to his pistol... - mcassill, 2015-04-22, 12:31
        
        i get that and all... - rob, 2015-04-22, 14:31
        
        The .25 Sharps is interesting - mcassill, 2015-04-22, 13:58
        
        Hmm....a .250-3000 in an AR platform? - Hoot, 2015-04-22, 14:47
        
        And a reinvention of the .25 TCU - mcassill, 2015-04-22, 16:26
        
        And a reinvention of the .25 TCU - bj, 2015-04-22, 21:36
        
        I'm sure we'll see the whole family of them resurrected - mcassill, 2015-04-23, 04:37
        
        Your post made me look it up. It IS interesting. - Hobie, 2015-04-22, 19:48
        
        Worst marketing choice ever. - cas, 2015-04-23, 05:53
        
        True enough... May I suggest .25 DED, i.e... - Hobie, 2015-04-23, 08:17
        
        We should try and work "tactical" in there somewhere. - Hoot, 2015-04-23, 09:55
        
        Ooo, Ooo! - Hoot, 2015-04-23, 10:05
        
        I'm thinking that a fellow... - mcassill, 2015-04-23, 11:26
        
        Whizzy...yes it is... - Rob Leahy, 2015-04-23, 14:59
        
        I'm having no luck selling my .22 Blackout idea. - cas, 2015-04-23, 15:32
        
        SNCO at Work Built One - Dave B, 2015-04-22, 23:09
        
        Sounds about like my experience.... - mcassill, 2015-04-23, 05:48

S&W M&P Pro - Creeker, 2015-04-21, 18:03
- S&W M&P Pro - Cherokee, 2015-04-21, 18:32
  - S&W M&P Pro - Creeker, 2015-04-21, 18:35
- Yesterday - Creeker, 2015-04-23, 08:51

Scam? - Drago, 2015-04-21, 11:55
- Scam? - Cherokee, 2015-04-21, 15:06
- Only if there's no product forthcoming... - Paul, 2015-04-21, 15:14
  - I've seen this before and... - rob, 2015-04-21, 18:29
    - I've seen this before and... - Paul, 2015-04-21, 18:58
      - Fun to tinker with and... - rob, 2015-04-21, 19:13
    - Yep, it'd be fun to play with all right. - Hoot, 2015-04-22, 06:47
      - Don't worry about that - mcassill, 2015-04-22, 07:11
- Why? - Byron, 2015-04-21, 18:34
  - Exactly. - Rob Leahy, 2015-04-22, 13:47
- Scam? - Probably not but I would wait. - Mark, 2015-04-25, 06:54

Odd forum behavior... - Hoot, 2015-04-20, 09:05
- Odd forum behavior... - Cherokee, 2015-04-20, 09:14
- Leftover anxiety of programmers... - Brian A, 2015-04-20, 09:17
- Odd forum behavior..text. - John Meeker, 2015-04-20, 10:31
  - Odd forum behavior..text. - Cherokee, 2015-04-20, 10:37
- Rest - Rob Leahy, 2015-04-20, 10:45
- Test - Paul, 2015-04-20, 15:01
  - So, what's your problem??? - Paul, 2015-04-20, 15:03
    - Spammers were using 'Test, this is just a test' in subject - Miles, 2015-04-20, 20:36
      - Aaaaahhh!!! Oops! - Paul, 2015-04-20, 21:03
        
        No problem - Miles, 2015-04-20, 23:27
      - Figured as much. Keep up the great work! - Rob Leahy, 2015-04-21, 09:41
    - A few days back, I was attempting to tell Dave B.... - Hoot, 2015-04-21, 05:14
- Ha! I feared this was about my inflammatory - BC, 2015-04-20, 21:16
  - This time.... - Hoot, 2015-04-21, 05:15
- Odd forum behavior... - Andrew, 2015-04-20, 22:24